Vacuum system

Vacuum system VACUUMSY STEM 1. Vacuum system design can be a single pumping one, two or three pumping one, reduce the vacuum time, improve product quality, increase the service life of the vacuum pump, and reduce the number of maintenance. 2. The computer is equipped with vacuum system management, which can monitor the running time of the vacuum pump and remind the maintenance. During the maintenance, the monitoring system is selected to switch, and the press can be maintained without stopping, thus improving the production efficiency.

EVA small foaming machine

Characteristic FEATURE 1. The P and PC control systems automatically control the mileage type. The operation order 2. The rising speed is fast, the pressure is maintained for a long time, and the medium pressure is automatically increased. 3. The special rapid relief valve is opened, the speed is fast, and the mold is adjusted freely. 4. The pool pressure speed and the mold is delayed after the pressure is released. The speed can be adjusted according to the characteristics and thickness of the finished product, to improve the quality, the specially designed Li board has the characteristics of ⊥ column regardless of fully automatic or semi-automatic analysis. ngtothecharacteristcsandthicknessafyour n

Rubber sole automatism foaming machine

Technical Parameters Model ModelHAXJ1-2150A HAXJ1-2150B Power Specification Power specification380V/50HZ Total Pressure Pressure(Tons)150 Motor Power (kw)Motor specification15 Layer Layer Layer number2 Operation Mode Operating Mode Semi-automatic Semi-Automatic Workstation Number of work stations6-10 Type Plate/Column Plate type/ with 4 columns Working Plate Size (mm) Size of plate450 * 500/ 480*550/ 480*500 Heating Method Heating method Oil, Steam, Electric electricity Layer Spacing (Mm) Total power consumption of Daylight between plate180 Total electricity (kw)15 Maximum stroke of master cylinder (mm) stroke360 machine size (length * width * height) Dimension (L * W * H) m7.8 * 1.8*1.66 Weight(Tons)12

EVA two color foaming machine

Features FEATURE1, using computer automation program control, easy to operate 2. Use the acceleration cylinder to rise more than one letter faster than usual 3. This has a Φ version of the push-pull control agent system to do double city or city is very convenient scope of application SUITABLEFOR suitable for the main production of foam slippers sole. Park move shoe soles, etc. Note: The technical rules on the area are for bending only. If there is any technical improvement or appearance improvement, anger will not be TECHNICALPARAMETERS separately.

Fully automatic EVA second molding machine

Technical Parameters/TECHNICALPARAMETERS Model ModelHAEC-Z60 Working Pressure (kg/cm2) Working pressure140 Total Pressure Pressure(Tons)60 Power Supply Specification Power specification380V/50HZ Working Board Size (mm) Size of plate450 * 470 Motor Specification (kw) Motor specification15 1 5.5 Layer Layer number4 Operation Mode Operating Mode Full Automatic automatic Workstation Number of work stations8-10 Heating Method Heating method Oil, Steam, Electricity Oil/Steam/electricity Layer Spacing (mm) Daylight between plate200 machine size (length * width * height) Dimension (L * W * H) m10.5 * 2.2*2.3 Master cylinder maximum stroke (mm) Maximum stroke500 weight (tons) Weight19 characteristics FEATURE:1, the mold cold and hot automatic exchange, the machine utilization rate is high, reduce the operator's physical strength. 2, improve product quality, reduce mold wear. 3, automatic buckle without manual, small space, low noise and safe operation. 4. Computerized production management, simple operation. Scope of application SUITABLEFOR: used for EVA secondary foaming, cooling and shaping daily products, other hot pressing molding cooling and shaping process. Remarks: The above technical specifications are for reference only and are subject to change or modification without prior notice.

EVA small foaming machine

Technical Parameters/TECHNICAL PARAMETERS Model Model Total Pressure Pressure(Tons) Working Plate Size of Plate (mm) Cylinder Diameter Dia.of cylinder (mm) Stroke (mm) Electric Heating Power Heating (kw) Motor Power (kw) Total Power Consumption Total Electricity (kw) Machine Size Dimension (L * W * H) m Weight (KG) HACJ-200T200600 * 6003604509.95.5162*1.4*2.23600 HACJ-250T250650 * 70042050011.77.5202.1*1.5*2.54600 HACJ-300T300650 * 75045050011.77.5202.1*1.5*2.54800 HACJ-400T400650 * 70050050011.711232.4*1.6*2.76000 HACJ-400T400750 * 80050050014.411262.4*1.6*2.76200 Features FEATURE1 and hydraulic control adopt imported well-known brands, hydraulic accessories, components, optional computer automatic control system. The movement is fast, stable, low noise and smooth. 2, another cooler, filter, protection to extend the life of hydraulic parts, so that the company has the best production performance. The scope of application SUITABLEFOR imitation porcelain tableware, ashtrays, daily necessities, handicrafts, toys and other thermosetting products. Note 1: Another 400T-500T pressure is available. Note 2: The above technical specifications are for reference only and are subject to change or modification without prior notice.